Oregon is at the forefront of a growing movement in the U.S. to construct more commercial and multifamily buildings with engineered wood products such as cross-laminated timber (CLT).
CLT is made by layering pieces of dimension lumber in alternating directions and bonding them together into massive panels several layers thick. CLT panels can be as large as 65 feet by 20 feet, and are strong enough to replace concrete and steel in mid-rise and even high-rise buildings.
D.R. Johnson Wood Innovations, located in Riddle, Ore., was the first mill in the U.S. to manufacture structural CLT panels certified for use in construction. A growing number of public and private CLT building projects in the state are in design, under construction or have been completed, including several using panels manufactured by D.R. Johnson.
Another Oregon product, mass plywood panel (MPP) is a veneer-based engineered wood product that is similar to plywood, but on a massive scale. Finished panels can be up to 12 feet wide, 48 feet long and 24 inches thick. The panels can be used as an alternative to CLT in similar applications, including constructing multistory buildings.
The choices we make about the materials used as we develop the built environment have long-term effects on our society and the environment. Wood is beautiful, strong, versatile and renewable. As trees grow, they remove carbon dioxide from the atmosphere and store it as carbon. With innovations in wood technologies, architects and engineers are now choosing wood for more and more building applications, including mid-rise and even high-rise structures.
By opening up the potential to build more commercial and multifamily buildings with a locally grown, renewable resource, the mass timber construction movement may help create more wood-products manufacturing jobs in struggling rural communities.
Traditionally, the wood products industry has been dependent on single-family home construction. But more multifamily housing units are being constructed, and encouraging these to be built with domestically produced wood could have a big impact on the industry and the rural areas where mills are located.
Federal and state initiatives supporting rural jobs have focused on increasing the use of wood in commercial construction.Early-stage funding (through the state-funded nonprofit Oregon BEST) for research at Oregon State University helped D.R. Johnson start manufacturing CLT. In 2016, the Oregon company announced it was adding staff to keep up with the high demand for the advanced wood product.
Officials with the state of Oregon have shown a keen interest in ramping up manufacturing of advanced wood products to support the state’s rural timber towns. The governor’s office, through Business Oregon and other state agencies, actively supports the development of advanced wood products markets and manufacturing. And the Oregon Building Codes Division has been instrumental in getting permits issued for mass timber buildings constructed with advanced wood products.